Most think of mold inside the home as a big problem — and it is. But what about that mold that grows on the outside of your home, such as on vinyl siding and other surfaces? While not as much of a health concern, it’s still a nuisance that must be handled.
Mold typically does not grow on clean, dry surfaces. And most materials, such as the plastic construction materials used on homes, is not a food source for mold. So why does it grow? Because of the dirt, soil, grime, and other organic matter that builds up on surfaces. While your vinyl siding may be vertical, it still gets dirty, and mold will grab onto that and grow like wildfire. And when there are trees and vegetation around your home, they release particles that attach to exterior surfaces and that just makes the problem worse.
The solution? Cleaning. Keeping surfaces clean, physically removing both molds and their food sources, is the best way to keep your home looking good.
While the solution seems simple, unless you have a ranch-style home, reaching all those high surfaces is not easy. You will need ladders, extension poles, and plenty of safety gear. If you have all that, and are ready to get to work, here are a few tips.
Get a good scrub brush, something you can put on a pole, and something that will scrub the surface but not scratch it. Softer nylon bristles are great. Have plenty of garden hose available, with a concentrated spray nozzle. A large bucket, a pump-up sprayer, or a sprayer assembly that you can put liquid cleaning products in, one that automatically dilutes and applies the cleaner to your home. You need all this before you get to work.
Purchase a quality exterior cleaning solution specifically for siding and removing mold. While you can create your own solution with a variety of household products (bleach, vinegar, detergent) what you find at the store is not expensive.
Then get to work. Hopefully on a nice, sunny day. Apply your product with the hose attachment or your pump-up sprayer, allow to dwell for a few minutes. The bleach component in your solution will take time to work.
Scrub the surface and spray it all off. Let it dry and inspect, repeating as necessary. Take your time, section off areas, and you will see fantastic results. The solution is to clean the surface of debris, not to “kill” mold. Mold has to be physically removed from surfaces.
But what about mold inside your home? That’s a different problem altogether. Never try to use bleach, you can actually make the problem worse. When you see mold inside, contact your favorite Tampa disaster restoration company, Accent American Inc. After all, it pays to call a pro!
813-621-6015
